{
  "q": "fall protection",
  "data": [
    {
      "section": "1910.28",
      "part": "1910",
      "agency": "OSHA",
      "heading": "Duty to have fall protection and falling object protection.",
      "snippet": "each employee exposed to <b>fall</b> and <b>falling</b> object hazards. Unless stated otherwise, the employer must ensure that all <b>fall</b> <b>protection</b> and <b>falling</b> object <b>protection</b> required by this section meet the criteria in § 1910.29, except that personal <b>fall</b> <b>protection</b> systems required",
      "citation": "29 CFR 1910.28"
    },
    {
      "section": "1910.29",
      "part": "1910",
      "agency": "OSHA",
      "heading": "Fall protection systems and falling object protection—criteria and practices.",
      "snippet": "General requirements. The employer must:\n(1) Ensure each <b>fall</b> <b>protection</b> system and <b>falling</b> object <b>protection</b>, other than personal <b>fall</b> <b>protection</b> systems, that this part requires meets the requirements in this section. The employer must ensure each personal <b>fall</b> <b>protection</b> system",
      "citation": "29 CFR 1910.29"
    },
    {
      "section": "1910.140",
      "part": "1910",
      "agency": "OSHA",
      "heading": "Personal fall protection systems.",
      "snippet": "Scope and application. This section establishes performance, care, and use criteria for all personal <b>fall</b> <b>protection</b> systems. The employer must ensure that each personal <b>fall</b> <b>protection</b> system used to comply with this part must meet the requirements of this section",
      "citation": "29 CFR 1910.140"
    },
    {
      "section": "1926.501",
      "part": "1926",
      "agency": "OSHA",
      "heading": "Duty to have fall protection.",
      "snippet": "General. (1) This section sets forth requirements for employers to provide <b>fall</b> <b>protection</b> systems. All <b>fall</b> <b>protection</b> required by this section shall conform to the criteria set forth in § 1926.502 of this subpart.\n(2) The employer shall determine",
      "citation": "29 CFR 1926.501"
    },
    {
      "section": "1926.502",
      "part": "1926",
      "agency": "OSHA",
      "heading": "Fall protection systems criteria and practices.",
      "snippet": "General. (1) <b>Fall</b> <b>protection</b> systems required by this part shall comply with the applicable provisions of this section.\n(2) Employers shall provide and install all <b>fall</b> <b>protection</b> systems required by this subpart for an employee, and shall comply with",
      "citation": "29 CFR 1926.502"
    },
    {
      "section": "1926.760",
      "part": "1926",
      "agency": "OSHA",
      "heading": "Fall protection.",
      "snippet": "Final deck attachments and installation of shear connectors shall not be performed in the CDZ.\n(d) Criteria for <b>fall</b> <b>protection</b> equipment. (1) Guardrail systems, safety net systems, personal <b>fall</b> arrest systems, positioning device systems and their components shall conform",
      "citation": "29 CFR 1926.760"
    },
    {
      "section": "1926.1423",
      "part": "1926",
      "agency": "OSHA",
      "heading": "Fall protection.",
      "snippet": "Boom walkway criteria. (i) The walkways must be at least 12 inches wide.\n(ii) Guardrails, railings and other permanent <b>fall</b> <b>protection</b> attachments along walkways are:\n(A) Not required.\n(B) Prohibited on booms supported by pendant ropes or bars",
      "citation": "29 CFR 1926.1423"
    },
    {
      "section": "57.14106",
      "part": "57",
      "agency": "MSHA",
      "heading": "Falling object protection.",
      "snippet": "Fork-lift trucks, front-end loaders, and bulldozers shall be provided with <b>falling</b> object <b>protective</b> structures if used in an area where <b>falling</b> objects could create a hazard to the operator.\n(b) The <b>protective</b> structure shall be capable of withstanding",
      "citation": "30 CFR 57.14106"
    },
    {
      "section": "56.14106",
      "part": "56",
      "agency": "MSHA",
      "heading": "Falling object protection.",
      "snippet": "Fork-lift trucks, front-end loaders, and bulldozers shall be provided with <b>falling</b> object <b>protective</b> structures if used in an area where <b>falling</b> objects could create a hazard to the equipment operator.\n(b) The <b>protective</b> structure shall be capable",
      "citation": "30 CFR 56.14106"
    },
    {
      "section": "77.403",
      "part": "77",
      "agency": "MSHA",
      "heading": "Mobile equipment; falling object protective structures (FOPS).",
      "snippet": "surface coal mines or the surface work areas of underground coal mines shall be provided with substantial <b>falling</b> object <b>protective</b> structures (FOPS). FOPS which meet the requirements of the Society of Automotive Engineers (SAE) Standard J 231 shall be considered",
      "citation": "30 CFR 77.403"
    }
  ],
  "meta": {
    "snapshots": [
      {
        "snapshot_id": "ecfr-2026-11-18-r1",
        "source": "ecfr_standards",
        "source_name": "Electronic Code of Federal Regulations (eCFR), OSHA and MSHA parts",
        "source_url": "https://www.ecfr.gov/api/versioner/v1",
        "dataset_period": "2026-11-18",
        "retrieved_on": "2026-11-21",
        "license": "US federal public domain (GPO/NARA); unofficial editorial compilation, not the legal print edition"
      }
    ],
    "caveat": "Published statistics and reported incidents are not a compliance determination. Reporting is incomplete and uneven by source."
  },
  "note": "Text is from the eCFR (unofficial compilation). A standard's text is not a compliance determination."
}